Car restoration is one activity that will leave you with a high sense of accomplishment. It is an activity that requires persistence, dedication and money!to say nothing about time. Fords and Chevy's are the two models that are the easiest to start with as parts are more readily available.

Prior to any car restoration you will need to arrange your shop for the the job. Gather the materials needed such as a camera, a few cardboard boxes, a sharpie and some tags for labels. It is important to keep track of the parts that are taken off sooner rather than later. When it is time to take the car apart you need to know what needs to be replaced and what needs to be repaired. This organization method will ensure you are not wasting parts at any time during the car restoration project.

Take inventory of the parts as you remove them by dividing them into two separate boxes labeled replace and repair. Take pictures of them as you do this getting a picture of what the car looks like with them on and off. This method will also assist you in figuring how much the cost will be and how long it will take you to complete the car restoration.

After you have your parts removed you can start the cleaning process. The cleaning process of the car restoration entails the car be stripped down to bare metal. This can be done through several methods although you will need to find one that you feel the most comfortable with. The easiest and fastest way by far is to have the car dipped in acid. This removes dust, rust, and other foreign materials.

Now you will see the damage to the car once it's stripped. You very well might find rust holes, damaged floorboards, and dents. Do not despair! Even if the car didn't look very bad when you purchased it you need to that this car has had a full eventful life. You want to extend it's life right? So get busy and take that Sharpie to mark all the things that either need replacing or repairing.

It is time to fix all those dents, holes, and problem areas to get ready for sanding. You will use several grades of sandpaper throughout the sanding process starting with 36 to 80. Once you have finished this step you are now ready to apply the glazing. Begin with 220 wet grit sandpaper and advance to 800 wet grit sandpaper. This will leave your car with a hazy mirror image and also offer a preventative measure against scratches.

Your car restoration is finished! You are now ready to display your beautiful car to the neighborhood with well earned pride.

For All The Essential Information On Car Restoration go to: Car Restoration Tips